meritek segmented film capacitors rwsf series ac rms (v) (f) ( % ) ( vac ) capacitance tolerance voltage t-t t-c d l ll mold 20 5 275 700 2000 35.5 61 100 1-64,fu 30 5 275 700 2000 45.5 77 100 1-57,fu 40 5 275 700 2000 45.5 77 100 1-57,fu test volta ge ( vdc ) outline dimensions/mm part numbering meritek series *rwsf dash rated voltage code 275 275v code t2 tab terminal t2 275 rwsf 206 - code 101 102 103 104 105 106 ( pf ) 100pf f pf 0pf ( nf ) --- 1 10 100 f ( f ) --- 0.001uf 0.01 0.1 1 10 capacitance specifications: 1. ul file no: e311150 2. operating temperature: -25 ~ + 85 . 3. capacitance range: 20.0, 30.0, 40.0 f. 4. capacitance tolerance: j = 5% 5. rated working voltage range: 275 vac 50/60 hz. 6. withstand voltage test: ( a ): dielectric strength test ( tv ): rated voltage x 175 % x 1.414 for vdc 1-5 sec, ( b ): between terminals and case ( tc ): rated voltage x 2 + 1000v ( minimum 2000 v ) for one minute at 25 . 7. dissipation factor (df): 0.5 % max. when measured at 1khz, 25 . 8. insulation resistance ( ir ): ( a ) between terminals: above 5000 f, at 100vdc in 25 . ( b ) between terminals and case: above 10000m , at 500vdc in 25 . 9. permissible overloads ( a ) voltage: at an r.m.s voltage between terminals not exceeding 110 the rated voltage. ( b ) current: at an r.m.s current not exceeding 130 the current which occurs at rated sinusoidal voltage and rated frequency excluding transients. taking into account the tolerance, the maximum permissible current can be up to 130 the rated current increased in proportion to the actual capacitance value compared with the rated capacitance value. 10. life test (continued): rated voltage x 135%, 1000hours, in the + 85 chamber. c/c in 5 %. df 0.5 % . 11. protected ?p2 10,000 a. f. c. (ampere fault current) 12. film: segmented metallized film.
|
